Product Overview

Marine-Standard Engineering for Permanent Exterior Exposure

WBP (Water Boil Proof) Glue Birch Plywood is the industry benchmark for structural panels required to perform in "Service Class 3" conditions—areas where the wood is frequently exposed to weather, high humidity, or direct water contact. The defining characteristic of this grade is the use of dark phenolic or advanced melamine resins that create a cross-linked chemical bond stronger than the wood fibers themselves. Unlike standard interior glues that soften when wet, our WBP adhesive is tested to withstand 72 hours of continuous immersion in boiling water without any signs of delamination. This makes it the essential substrate for architectural cladding, marine joinery, and external signage where structural failure is not an option.

The core is composed of 100% slow-grown Northern Birch veneers, known for their tight annual rings and high mechanical density. During production, we implement a "Solid-Core" policy, ensuring that internal voids are virtually eliminated. This is critical for exterior use because voids can trap moisture, leading to internal rot or "blow-outs" during freeze-thaw cycles. Each layer is cross-laminated to provide equal strength in both directions, resulting in a panel that resists the warping and "checking" commonly seen in exterior-grade softwoods. The surface is sanded to a high grit, providing an ideal base for high-performance exterior paints, oils, or specialized UV-resistant coatings.

Durability is matched by versatility. While designed for the elements, the aesthetic quality of the B/BB face remains high enough for visible outdoor furniture and modern "open-edge" architectural details. Because birch has a naturally fine and closed pore structure, it absorbs less moisture than open-grained woods like oak or pine, further extending the life of the protective finish. For contractors and engineers, WBP Birch Plywood represents the ultimate "Insurance Grade" material, providing peace of mind that the structure will remain sound for decades, regardless of the climate.

72-Hour Boil TestedWBP Phenolic ResinFull Hardwood CoreService Class 3 RatedFreeze-Thaw Resistant

Technical Specifications

Glue StandardEN 314-2 Class 3 (WBP)
Core Construction100% Birch Multi-ply
Thickness4mm, 6.5mm, 9mm, 12mm, 15mm, 18mm, 21mm, 24mm, 30mm
Density700kg - 720kg/m³
Moisture Content8% - 10% (Pre-shipment)
Face GradeB/BB or BB/CP (Exterior)
Service ClassEN 636-3 (Exterior)

Exterior Applications

  • Architectural Facades & Cladding
  • Marine Cabinetry & Boat Refits
  • External Signage & Billboards
  • Outdoor Playground Equipment
  • Garden Offices & Shed Structures

Core Competitive Strengths

  • Zero Delamination: Glue bond survives boiling.
  • High Loading: Superior bending strength for roofs.
  • Stable Dimensions: Low expansion in humidity.
  • Surface Quality: Takes exterior stains perfectly.

Trade Summary

MOQ1x20GP Container
Lead Time20-25 Days
PackagingWaterproof Shrink-Wrapped Pallets
CertificationsCE, FSC, EN 13986, BFU 100
Standard Sizes1220x2440 / 1250x2500 / 1525x3050mm
OriginDirect Factory Export
Tianma Lvjian Group Co., Ltd.

About Us

Tianma Lvjian is China WBP Glue Birch Plywood Exterior Manufacturers and Wholesale WBP Glue Birch Plywood Exterior Factory. With 27 years of professional experience in the research, manufacturing, and sales of Birch Plywood, we adhere to the principles of safety, practicality, environmental friendliness, and aesthetics. Our products consistently meet the European standard of E1, ensuring high levels of environmental safety. We use pure birch wood as the main material and continuously innovate to enhance the design and structure of our birch plywood. We also emphasize surface treatment techniques, delivering environmentally friendly, performance-stable, and visually unique new products to the market and our valued customers.

Honor

honor
ICTT-22019-TIANMA-LVJIAN-(NANTONG)-WOOD-STRUCTURE-TECHNOLOGY-CO.,-LTD
honor
TJIN2412003437PL02-1_EN
honor
TJIN2412003437PL01-1_EN
honor
(65073)VCP-12177
honor
(65072)VCP-12176
honor
CE-EN 13986
  • Birch Plywood
    100%
    Birch plywood
  • Safety Stock
    40000
    Safety stock
  • Capacity
    65000
    Annual production capacity
  • Export Countries
    20+COUNTRIES
    Export to over 20 countries
  • Experience
    20+YEARS
    dedicated experience in the wood industry
  • Personnel
    200+
    Highly qualified and technically competent personnel
Contact Us Now

Logistics and Financial Terms

Exterior grade panels are often destined for coastal or high-humidity regions. We use enhanced packaging, including moisture-absorbing desiccants inside the container and full-face protective sheets on the top and bottom of every pallet. Payment is 30% T/T or L/C at sight. Each shipment includes a "Certificate of Analysis" confirming the WBP boil-test performance for the specific batch.

Bonding Comparison

  • Vs. MR (Interior) Plywood: MR will fall apart in 30 minutes of boiling; WBP stays intact for 72+ hours.
  • Vs. Marine Plywood (BS 1088): Our WBP Birch uses the same high-spec glue but allows for slightly more natural wood character in the core.
  • Vs. OSB3: Birch WBP has 3x the bending strength and a far smoother surface for painting.

The WBP Mechanism

The Phenolic Resin Bond creates a "Plasticized" layer between veneers. This Covalent Bond is unaffected by microorganisms or temperature extremes, protecting the Multi-Ply Core from structural failure when exposed to the elements.

Green Building Commitment

Our WBP Birch Plywood is a sustainable alternative to high-carbon exterior materials like PVC or Aluminum. Sourced from FSC-certified forests, it stores carbon for the duration of its long service life. By using low-emission phenolic resins, we ensure that while the board is tough enough for the outside, it still meets strict indoor air quality standards (E1/E0) for hybrid indoor-outdoor spaces.

Frequently Asked Questions
Q: Does WBP stand for "Waterproof"?
A: It stands for Water Boil Proof. The glue is waterproof, but the wood itself can still absorb water if not sealed.
Q: Do I need to seal the edges?
A: Yes! For exterior use, you must seal all edges with a waterproof paint or resin to prevent "edge-wicking."
Q: Can I use this for a boat hull?
A: It is excellent for marine joinery and decking, but for structural hulls, we recommend our specialized Marine Grade Birch.
Q: Is the glue toxic?
A: No, once cured, WBP phenolic glue is inert and meets E1/E0 emission standards.
Q: How long will it last outside?
A: With a high-quality UV-resistant finish and sealed edges, it can last 15-20+ years in exterior conditions.
Q: Why is the glue line dark?
A: Phenolic resin is naturally dark brown or black, which is a visual indicator of high-strength exterior glue.
Q: Can I use it for a flat roof?
A: Yes, it is a superior structural base for EPDM or felt roofing membranes due to its high stiffness.
Q: Is it termite resistant?
A: While birch is not naturally termite-proof, we offer preservative-treated (ACQ) versions for high-risk areas.
Q: Can I laser cut WBP plywood?
A: Yes, but it requires more power than interior glue and produces darker edges due to the phenolic resin.
Q: What is the best thickness for cladding?
A: 9mm and 12mm are common for vertical cladding, while 18mm is standard for structural outdoor floors.
Related Tags

Ready to Elevate Your Projects?

Get in touch with our team for quotes, technical specifications, and customized solutions.

Contact Us Now