English
中文简体
100%
Birch plywood
Product Overview
The Confluence of Natural Authenticity and Engineering Stability
Our Furniture Grade Solid Wood Series is the premier choice for designers who demand the weight, warmth, and texture of genuine timber without the inherent unpredictability of wide-slab solid wood. This series encompasses high-end edge-glued panels (EGP) and finger-jointed boards made from premium species such as Birch, Oak, Walnut, and Beech. By meticulously selecting and kiln-drying individual timber staves, we create a "solid" panel that resists the natural tendency of wood to cup, twist, or split. Each stave is color-matched and orientation-optimized to ensure a harmonious visual flow, making these panels the definitive substrate for heirloom-quality tables, luxury cabinetry, and bespoke residential joinery.
The manufacturing process focuses on tension relief. We kiln-dry the raw timber to a precise 8-10% moisture content, followed by a stabilization period. The staves are then bonded using high-pressure industrial presses and D3/D4 rated water-resistant adhesives. This multi-stave construction disrupts the internal stresses found in single wide planks, resulting in a panel that stays flat across large spans. For the furniture maker, this translates to less waste and a significantly reduced risk of structural failure in the finished piece. The surface is factory-calibrated and dual-sanded, arriving ready for the application of natural oils, waxes, or high-performance lacquers that bring out the wood's inherent character.
Versatility is at the core of the Solid Wood Series. Available in various stave widths—from narrow industrial finger-joints to wide, elegant full-length staves—this series caters to both modern minimalist and traditional rustic aesthetics. Because these are "solid" throughout, they offer infinite possibilities for edge profiling, routing, and carving. There are no veneers to sand through and no core gaps to hide. Whether you are crafting a heavy-duty butcher block countertop or a delicate floating shelf, our Solid Wood Series provides the structural integrity and timeless beauty of nature, refined for the modern workshop.
Edge-Glued StabilityA-Grade Color MatchZero Veneer - 100% SolidKiln-Dried 8-10%Precision Sanded
Technical Specifications
| Species | Birch, Oak, Walnut, Ash, Beech |
| Construction | Full-Stave or Finger-Jointed |
| Glue Grade | D3 / D4 (Water Resistant) |
| Thickness | 18mm, 20mm, 25mm, 30mm, 40mm |
| Standard Sizes | 600/1220mm x 2440/3000mm |
| Moisture | 8% - 12% (MC) |
| Sanding | 180-240 Grit Finish |
Key Applications
- Solid Wood Dining Tables
- Luxury Kitchen Countertops
- Stair Treads and Risers
- Bespoke Bedroom Furniture
- Executive Office Desks
Core Competitive Strengths
- Authenticity: Real wood feel through the entire thickness.
- Workability: Can be carved, profiled, and repaired easily.
- Stability: Engineered to prevent warping and cupping.
- Joinery: Exceptional for dovetail and mortise-tenon joints.
Trade Summary
| MOQ | 5 Cubic Meters (Mixed Species) |
| Lead Time | 25-35 Days |
| Packaging | Individually Wrapped Sheets |
| Certifications | FSC, PEFC, ISO9001 |
| Customization | Specialty Stave Widths |
| Surface Finish | Raw or Pre-Oiled Options |
About Us
Tianma Lvjian is China Furniture Grade Solid Wood Series Manufacturers and Wholesale Furniture Grade Solid Wood Series Factory. With 27 years of professional experience in the research, manufacturing, and sales of Birch Plywood, we adhere to the principles of safety, practicality, environmental friendliness, and aesthetics. Our products consistently meet the European standard of E1, ensuring high levels of environmental safety. We use pure birch wood as the main material and continuously innovate to enhance the design and structure of our birch plywood. We also emphasize surface treatment techniques, delivering environmentally friendly, performance-stable, and visually unique new products to the market and our valued customers.
Honor
ICTT-22019-TIANMA-LVJIAN-(NANTONG)-WOOD-STRUCTURE-TECHNOLOGY-CO.,-LTD
TJIN2412003437PL02-1_EN
TJIN2412003437PL01-1_EN
(65073)VCP-12177
(65072)VCP-12176
CE-EN 13986
-
-
40000m³Safety stock -
65000m³Annual production capacity -
20+COUNTRIESExport to over 20 countries -
20+YEARSdedicated experience in the wood industry -
200+Highly qualified and technically competent personnel
Contact Us Now
Logistics and Financial Terms
Solid wood panels are significantly heavier and more sensitive to humidity than plywood. We individually shrink-wrap each panel and use reinforced heavy-duty pallets with corner protectors. Shipping in 20' containers is common for weight optimization. Payment terms are 30% T/T deposit and 70% against B/L. We provide "Species Authenticity Certificates" and moisture content reports for every batch.
Construction Comparison
- Vs. Single Wide Plank: Edge-glued panels are much more stable and less likely to warp.
- Vs. Veneered Plywood: Solid wood allows for deep carving and edge profiling without exposing a core.
- Vs. MDF: Solid wood offers vastly superior strength, screw retention, and longevity.
Solid Panel Anatomy
The Edge-Glued (Full Stave) construction uses long strips of wood glued side-by-side. The Alternating Grain technique ensures that the natural movement of one stave is countered by the next, keeping the board flat.
Green Building Commitment
Our Solid Wood Series is the ultimate "carbon sink" material. Sourced from FSC-certified sustainable forests, these panels promote responsible forestry. Because they are 100% natural and repairable, they support a Circular Economy—furniture made from this series can be sanded and refinished for decades rather than being replaced, significantly reducing long-term environmental impact.
Frequently Asked Questions
Q: Is this "real" wood?
A: Yes, it is 100% solid natural timber, edge-glued for stability. It is not plywood or veneer.
Q: Why are they glued in strips?
A: Narrower strips are much more stable and less likely to warp or cup than a single wide plank of wood.
Q: Can I use this for a kitchen island?
A: Yes, it is an industry favorite for high-end "butcher block" style countertops and islands.
Q: What is the difference between Full Stave and Finger-Joint?
A: Full Stave uses strips that run the whole length; Finger-Joint uses smaller pieces joined both on the ends and sides.
Q: Does it need a finish?
A: Yes, like all solid wood, it must be sealed with oil, wax, or lacquer to protect it from moisture and stains.
Q: Can I sand it?
A: Yes, you can sand it as many times as you like; there is no veneer to worry about.
Q: Is it suitable for outdoors?
A: Only certain species (like Teak or White Oak) are suitable for outdoors, and they require specialized exterior glues.
Q: Will the color match between sheets?
A: We hand-sort staves for color consistency, but as a natural product, slight variations are expected and celebrated.
Q: How do I prevent it from warping?
A: Always finish both sides equally and allow the wood to acclimate to your environment before installation.
Q: What is the maximum thickness?
A: We commonly produce up to 40mm, but thicker slabs can be custom ordered for structural use.
Related Tags
Ready to Elevate Your Projects?
Get in touch with our team for quotes, technical specifications, and customized solutions.
Contact Us Now
